An official website of the United States government
Here’s how you know
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
“To survive and win…we must leverage ingenuity and technology to develop comprehensive solutions” -U. S. Army CBRN capability development update, 2024 CBRN
“Air Power alone does not guarantee America’s security, but I believe it best exploits the nation’s greatest asset – our technical skill” -Gen. Hoyt Vandenberg
For more than three decades, the National Institute of Standards and Technology (NIST) has calibrated the wavelengths of lasers used in industry, academia, and
The National Institute of Standards and Technology (NIST) has a wide variety of programs for the calibration of instruments and components for space-based research in the extreme ultraviolet (EUV). Many of these programs have been in existence since the 1960s, and have provided calibration support
The Dosimetry Group of the Radiation Physics Division has an on-going collaboration with the FDA, NIH, and the Walter Reed National Military Medical Center to characterize clinical dosimeters for the purpose of monitoring the radiation dose delivered to patients during computed tomography (CT) exams
The NIST facility for carrying out beta-particle measurements for radiation-protection purposes consists of: a second-generation beta-particle secondary standard system (BSS2) which includes a set of well-characterized beta-particle sources (Sr-90, Kr-85) covering a wide energy and dose-rate range
Measurements provided by these accredited dosimetry calibration laboratories (ADCLs) are directly traceable to the national standard for absorbed dose to water and air kerma from 60Co therapy level gamma ray beams held at NIST. This is achieved by the use of high quality ionization chambers that are
Since 1989, the NIST Charpy Machine Verification Program in Boulder, Colorado has been indirectly verifying Charpy machines around the world according to ASTM
We present an optical scheme to simultaneously characterize the cross-axis and rotational parasitic motions of a long-stroke shaker. By leveraging the geometric
Measurement of oscillating mass flows is typically required for the study of cryocoolers and cryocooler compressors. Although many measurement techniques are
Zenn Roberts, Aaron Hagerstrom, Cole Gray, Angela Stelson, Vincent Neylon, Christian Long
The National Institute of Standards and Technology (NIST) maintains the United State's primary standards for traceable RF and mm-wave power measurements. These
The Taylor Hobson Form Talysurf PGI 1240 is a mechanical stylus profilometer for surface texture and microform measurements. Its primary purpose is for the
The largest of 6 NIST deadweight force generation machines, the 4.45 MN Deadweight Force Generating Machine can apply 20 equal force increments of 222 kN (or